Tech Edge System The three stage sharpening system that takes all the mystery and error out of knife sharpening
		Edge Restorer - for initial knife edge angle restoration   Stage 1 of the Furi TECH EDGE Pro Knife Sharpening System   (Only required for initial restoration of worn blades: not for daily edge sharpening/honing.)   Uses tungsten carbide cutters to quickly reshape worn blade edges to precise angles.  This stage is only needed to re-shape and coarse hone worn knives. Simply pull back through the cutter 6-12 times.
		Diamond Fingers - for sharpening and coarse edge honing   Stage 2 of the Furi TECH EDGE Pro Knife Sharpening System   Hone the edges while maintaining a precise 20° edge angle on each side of the blade.  This stage is initially only needed to reshape and coarse hone worn knives.  After this use once or twice a year to ensure perfect edge shape and condition.  Simply swipe down and back through the fingers 6-12 times.
		Tech Hone Fingers - for knife honing   Stage 3 of the Furi TECH EDGE Pro Knife Sharpening System   Fine hone the edge to extraordinary professional sharpness, while maintaining the 20° edge angle on each side.  Simply swipe down and back through the fingers 6-12 times.  Use daily to maintain super sharp edges.
			About Furi